NEWS

Quartz transition joints are widely used in today's life, especially in pipe connection and cable laying. It has become one of the indispensable tools, especially in the development of new infrastructure. As the most mainstream joint product at present, I will take you to understand the purpose of transition joints. What problems should be paid attention to in use?

1. Transition What are the uses of the connector

Quartz transition joints are widely used at present, and their main function is to connect two different types of pipelines, especially in the fields of telecommunications and electric power. For example, when a pipe cannot be bent due to its material, an extra joint is needed to connect the two pipes to achieve the bending effect.

Second, pay attention to the intersection

In the process of installing the quartz transition joint, It is necessary to determine whether the diameter of the pipe used is consistent with the diameter of the transition joint, and take measures to prevent leakage and corrosion during installation. After all, whether the pipe is used to protect the optical fiber of the cable or to transport liquids and gases, airtightness must be considered. At the same time, it is necessary to do a good job of anti-corrosion treatment, while ensuring sufficient sealing performance.

The quartz transition joint can be regarded as an ordinary joint because it can be used by various industrial enterprises. As an important part of the transition, installation must not be sloppy, otherwise it will easily cause leakage, and some special industries may even be prone to safety accidents. Therefore, we should be clear about the steps of the transition joint in the installation process. Let me introduce the installation steps of the quartz transition joint in detail:

First, check before installation. Before installing the transition joint body, check whether all parts are missing, whether the parts are damaged, and whether they are misaligned during connection.

How to splice parts. All the parts that can be assembled into a whole are assembled and spliced ​​to lay a good foundation for the final assembly. Try to ensure that the connection is tight to avoid leakage.

The second is the fixing (bolt) action. Fix all assembled parts as a whole with bolts and nuts to ensure the firmness of the fixation. Do not overtighten the parts, which may damage the parts.

The last step is to adjust the position. Install the final assembled quartz transition joint and adjust the final position to ensure that it can work normally. The performance of the transition joint body should also be tested, and the work test should check whether there will be leakage and loose installation to ensure that there will be no safety problems.